Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- wiki:ems:openhab [2016/03/06 14:41]
maniac103 [MQTT testen]
+++ wiki:ems:openhab [2020/06/15 22:48] (aktuell)
ehobel [EMS in OpenHAB einbinden]
@@ Zeile 40: / Zeile 40: @@
 </file>
-Der Sensor-Name (hier: /ems/sensor/hk1/targettemperature/value) kann entweder dem oben beschriebenen Test oder der hoffentlich bald entstehenden ;-) Dokumentation entnommen werden.
+**Sensoren:**
+	/ems/sensor/3wayonww/value
+	/ems/sensor/burner/targetmodulation/value
+	/ems/sensor/burner/currentmodulation/value
+	/ems/sensor/errorcode/value
+	/ems/sensor/exhaust/currenttemperature/value
+	/ems/sensor/flameactive/value
+	/ems/sensor/flamecurrent/value
+	/ems/sensor/flamecurrent/value
+	/ems/sensor/heater/targettemperature/value
+	/ems/sensor/heater/currenttemperature/value
+	/ems/sensor/heater/pumpactive/value
+	/ems/sensor/heater/heaterstarts/value
+	/ems/sensor/heater/operatingminutes/value
+	/ems/sensor/heater/operatingminutes2/value
+	/ems/sensor/heater/heatingminutes/value
+	/ems/sensor/heater/currenttemperature/value
+	/ems/sensor/heateractive/value
+	/ems/sensor/heaterpump/currentmodulation/value
+	/ems/sensor/heatexchanger/currenttemperature/value
+	/ems/sensor/hk1/offoptimization/value
+	/ems/sensor/hk1/onoptimization/value
+	/ems/sensor/hk1/wwoverride/value
+	/ems/sensor/hk1/floordrying/value
+	/ems/sensor/hk1/frostprotectmodeactive/value
+	/ems/sensor/hk1/summermode/value
+	/ems/sensor/hk1/daymode/value
+	/ems/sensor/hk1/opmode/value
+	/ems/sensor/hk1/roomtargettemperature/value
+	/ems/sensor/hk1/roomcurrenttemperature/value
+	/ems/sensor/hk1/onoptimizationminutes/value
+	/ems/sensor/hk1/offoptimizationminutes/value
+	/ems/sensor/hk1/characteristic/value
+	/ems/sensor/hk1/roomtemperaturechange/value
+	/ems/sensor/hk1/requestedpower/value
+	/ems/sensor/hk1/partymode/value
+	/ems/sensor/hk1/pausemode/value
+	/ems/sensor/hk1/vacationmode/value
+	/ems/sensor/hk1/holidaymode/value
+	/ems/sensor/hk1/switchpointactive/value
+	/ems/sensor/hk1/targettemperature/value
+	/ems/sensor/ignitionactive/value
+	/ems/sensor/operatingminutes/value
+	/ems/sensor/outdoor/dampedtemperature/value
+	/ems/sensor/outdoor/currenttemperature/value
+	/ems/sensor/outdoor/currenttemperature/value
+	/ems/sensor/pressure/value
+	/ems/sensor/returnflow/currenttemperature/value
+	/ems/sensor/servicecode/value
+	/ems/sensor/systemtime/value
+	/ems/sensor/warmwaterminutes/value
+	/ems/sensor/warmwaterpreparationactive/value
+	/ems/sensor/warmwaterpreparations/value
+	/ems/sensor/warmwatersystemtype/value
+	/ems/sensor/warmwatertempok/value
+	/ems/sensor/ww/targettemperature/value
+	/ems/sensor/ww/currenttemperature/value
+	/ems/sensor/ww/daymode/value
+	/ems/sensor/ww/onetimeload/value
+	/ems/sensor/ww/desinfectionactive/value
+	/ems/sensor/ww/boostcharge/value
+	/ems/sensor/ww/sensor1failure/value
+	/ems/sensor/ww/sensor2failure/value
+	/ems/sensor/ww/failure/value
+	/ems/sensor/ww/desinfectionfailure/value
+	/ems/sensor/ww/loading/value
+	/ems/sensor/ww/flowrate/value
+	/ems/sensor/zirkpump/daymode/value
+	/ems/sensor/zirkpump/opmode/value
+	/ems/sensor/zirkpumpactive/value
+**Commands:**
+Steuerbefehle können mittel eines Commands an den EMS Bus weitergegeben werden. z.B. lautet der Befehl zum Umstellen des Heizkreises 1 der Heizung auf den Tagbetrieb:
+  * Topic: "/ems/control/hk1/mode" Message: "day"
+Ein MQTT Topic ist nach dem folgenden Pattern aufgebaut: <Präfix><Erste Ebene><Command> (ohne die jeweiligen Anführungszeichen)
+Anhand von /ems/control/hk1/mode setzt sich der Topic wie folgt zusammen:
+  * Präfix: /ems/control/
+  * Erste Ebene: hk1/
+  * Command (hier da hk Command): mode
+Präfix: "/ems/control/"
+	Erste Ebene
+		"hk[1|2|3|4]"
+		"ww"
+		"uba"
+		"rc"
+		"raw" (optional Flag HAVE_RAW_READWRITE_COMMAND in Makefile must be uncommented)
+		"cache"
+		"getversion"
+		"OK"
+	hk Commands:
+		"mode [day|night|auto]"
+		"daytemperature <temp>"
+		"nighttemperature <temp>"
+		"temperatureoverride <temp>"
+		"getholiday"
+		"holidaymode <start:YYYY-MM-DD> <end:YYYY-MM-DD>"
+		"vacationtemperature <temp>"
+		"getvacation"
+		"vacationmode <start:YYYY-MM-DD> <end:YYYY-MM-DD>"
+		"partymode <hours>"
+		"pausemode <hours>"
+		"getactiveschedule"
+		"selectschedule [family|morning|early|evening|forenoon|noon|afternoon|single|senior|custom1|custom2]"
+		"getcustomschedule [1|2]"
+		"customschedule [1|2] <index> unset"
+		"customschedule [1|2] <index> [monday|tuesday|...|sunday] HH:MM [on|off]"
+		"scheduleoptimizer [on|off]"
+		"mintemperature <temp>"
+		"maxtemperature <temp>"
+		"reductionmode [offmode|reduced|raumhalt|aussenhalt]"
+		"heatingsystem [none|heater|floorheater|convection] [outdoor|indoor]"
+		"vacationreductionmode [outdoor|indoor]"
+		"maxroomeffect <temp>"
+		"designtemperature <temp>"
+		"roomtemperatureoffset <temp>"
+		"frostprotectmode [off|byoutdoortemp|byindoortemp]"
+		"frostprotecttemperature <temp>"
+		"summerwinterthreshold <temp>"
+		"reducedmodethreshold <temp>"
+		"vacationreducedmodethreshold <temp>"
+		"cancelreducedmodethreshold <temp>"
+		"requestdata"
+		"OK"
+	ww Commands:
+		"mode [on|off|auto]"
+		"temperature <temp>"
+		"limittemperature <temp>"
+		"loadonce"
+		"cancelload"
+		"getcustomschedule"
+		"customschedule <index> unset"
+		"customschedule <index> [monday|tuesday|...|sunday] HH:MM [on|off]"
+		"selectschedule [custom|hk]"
+		"showloadindicator [on|off]"
+		"thermdesinfect mode [on|off]"
+		"thermdesinfect day [monday|tuesday|...|sunday]"
+		"thermdesinfect hour <hour>"
+		"thermdesinfect temperature <temp>"
+		"zirkpump mode [on|off|auto]"
+		"zirkpump count [1|2|3|4|5|6|alwayson]"
+		"zirkpump getcustomschedule"
+		"zirkpump customschedule <index> unset"
+		"zirkpump customschedule <index> [monday|tuesday|...|sunday] HH:MM [on|off]"
+		"zirkpump selectschedule [custom|hk]"
+		"requestdata"
+		"OK"
+	uba Commands
+		"antipendel <minutes>"
+		"hyst [on|off] <kelvin>"
+		"burnermodulation <minpercent> <maxpercent>"
+		"pumpmodulation <minpercent> <maxpercent>"
+		"pumpdelay <minutes>"
+		"geterrors"
+		"schedulemaintenance [off | byhour <hours / 100> | bydate YYYY-MM-DD]"
+		"checkmaintenanceneeded"
+		"testmode [on|off] <burnerpercent> <pumppercent> <3wayonww:[0|1]> <zirkpump:[0|1]>"
+		"requestdata"
+		"OK"
+	rc Commands:
+		"mintemperature <temp>"
+		"buildingtype [light|medium|heavy]"
+		"outdoortempdamping [on|off]"
+		"requestdata"
+		"geterrors"
+		"getcontactinfo"
+		"setcontactinfo [1|2] <text>"
+		"settime YYYY-MM-DD HH:MM:SS"
+		"OK"
+	raw Commands:
+		"read <target> <type> <offset> <len>"
+		"write <target> <type> <offset> <data>"
+		"OK"
+	cache Commands:
+		"fetch <key>"
+		"OK"
+	getversion commands
+		"getversion"
 ===== Fertig =====
 Damit haben wir die EMS-Sensorwerte in OpenHAB übernommen und können sie dort weiterverarbeiten (anzeigen, in Regeln verwenden, über die Persistenzschicht in eine Datenbank schreiben usw. usf.).
 Prinzipiell ist auch die Steuerung der Heizung über OpenHAB möglich; hiermit wird sich eine spätere Version dieser Anleitung beschäftigen.

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge